Not sure why this bothers me so much, but why is it the Vista Media Center Recorded TV list, has shows like “The Office” with the shows that start with T’s instead of the O’s? One of my first jobs when I was still in high school was working at a video store and while I wasn’t kick’n back behind the counter watching The Hunt For Red October for the 100th time, I was putting movies back on the shelves, and I can tell you one thing for sure, at The Reel Place, we didn’t do it that way.
How not to put Recorded TV in alphabetical order
May 8th, 2008mControl 2.1, so close, yet so far away
May 2nd, 2008One of the main reasons I started to get into home automation was so I could create lighting scenes. For example, when my garage door opens and it’s dark outside, I have 4 lights turn on for 5 minutes. My garage is detached and the light switch to light the way into the house is in the house. This was not a good design on my builders part, but I’ve overcome it and it’s so handy when it doesn’t work, I hear about it from my wife. Another example is when I’m ready to watch my favorite movie at night. My sconces turn on to 50%, my dinning room light goes to 45%, and my hallway and kitchen lights are turned off. This scene controls about seven devices and would take me a couple of minutes to set without a home automation system.
The problem is when I try to get complicated. You see the garage lights are activated by the controller that is also talking to the alarm and knows if it’s dark outside. The movie scene must know a movie is starting and that it’s late enough my wife won’t be annoyed by the lights turning off in the kitchen. As you can see, a good reliable controller is very important.
I’ve had two controllers so far and haven’t been thrilled with either of them so I’ve tried mControl from time to time. The latest 2.1 is really awesome, it has a very powerful generic device driver that can easily be configured to control any IR, RS-232 or TCP enabled device — in fact I wrote two basic drivers in about an hour once I understood the format of the xml file. The macro builder is powerful and a joy to use — as apposed to Mainlobby which is a total bear. The price is very reasonable at $75. The UI is simple and easy to access from VMC or any web browser enabled device. At this point you have to be wondering, but what Ben, but what? The problem is that mControl can’t activate Insteon lighting scenes and what’s worse if it turns on lights using a semi-workable workaround, my KeypadLincs will be out of sync which means the switch and the light won’t be in the same state — imagine the light is on, but the switch says it’s off. I’m really bummed at this and while Embedded Automation ensures me this will be addressed in Q3 2008, I’m disappointed.
To be fair, I’ve had problems with the my Insteon groups since day one. And since mControl is the third controller I’ve used, and all seem to have some sort of problem with groups, I’m starting to think it may be time to move on. The problem is that I have about $1000 invested in Insteon devices and moving on is not an inexpensive proposition. I don’t suppose any of you are using a better lighting solution?
Why the ZeeVee could be so cool
May 1st, 2008The embargoed lifted this morning on a device I’ve been waiting since I discovered HD about 4 years ago — well almost. As long as I can remember, we’ve had RF modulators to make our lives simple, I remember my original Atari had one, you just plugged it inline with your coax going into your TV and you were off enjoying games. Of course NTSC RF-modulators have pretty bad picture quality and most game consoles today don’t use them, but they are still very useful for sending TV around your house on the existing coax. The problem is that if you think SD quality of RF-modulators is bad in the SD world, don’t even try to compare it to HD.
But finally the first consumer QAM RF-modulator is coming. Why is this so cool? Well lets say you want to watch your HD TiVo in every room of your house, but don’t want to buy another TiVo or pay the monthly fee. You could connect a device like this — but with component inputs — to your TiVo and then in any room of the house tune to channel 3 and now you’ll have HD with AC3 sound. You could even watch it on every TV in the house at the same time.
But lets take it to the next level, you could have a few of these and put all your gear in same room and then use the existing coax in the house to watch whatever you want on any TV you want. Blu-ray is on channel 3, HD TiVo on 4, VMC on 5 etc. Sure you can do this now, but it requires you to run expensive cables to each TV in the house and have devices to receive the signal at each TV. Not to mention have an expensive matrix switch and remotes to control it.
The biggest problem with the Zv now is that it only accepts VGA input and works with QAM instead of ATSC. Although many TVs have QAM tuners, the number isn’t nearly as many as those that have ATSC — it’s required by law after all. But the lack of component input and the lack of audio inputs other than USB is the real kicker. This makes the box unable to do exactly what I want it to do, but I’m sure what I’m after wont’ be far behind.
It’s official, Vista Media Center is so much better than TiVo
April 29th, 2008Before I get into the good stuff that backs up my opinion, let me give you some background. I’ve used Windows my entire life and although I preferred DOS to Windows 3.1, I’ve always been comfortable with Windows. When I really started getting into computers around 2000, I started to explore Linux and in the process of using Linux on my laptop (Gentoo) for years, I started to despise many things about the way Microsoft conducted its business and because of the fact that the UI didn’t seem to keep up with the times — ie, Vista has almost the same task bar as Windows 95. The irony of course is that I earn my living as an MCSE, so while I still don’t prefer Windows on my computers, I recognize that there are a few problems, like corporate email, that Microsoft simply has the best solution for. As for TiVo, my first DVR was a ReplayTV, but after I discovered HDTV 2003, I was quick to pick up a DirecTiVo HD for the low low price of $1000. So having been anti-Microsoft for a few years and a TiVo fanboy for almost five, enjoying a MS product so much more than TiVo, feels very backward to me.
Price
Believe it or not, TiVo cost me much more than my Vista Media Center PC with CableCARD. Of course this isn’t apples to apples, and I owned the more expensive version of the HD TiVo, but looking back I had $2302 invested for a two room system with 750GB of storage over 2 years. While at the same time VMC cost me $1900 — but that includes a Blu-ray drive and software. Of course if you were willing to settle for the two TiVo HDs, then you could get a two room setup for $1100. The big difference between the two in price is the service, TiVo gets $300, per box, for three years, Microsoft doesn’t charge for guide data at all, no matter how many TVs you have.
Multiroom
The multiroom capabilities of Vista Media Center are easily the biggest upgrade for me over TiVo. The up front cost to add a room is $250 for both, but again TiVo will cost you an additional $300 every three years. But price isn’t everything and the reason why VMC still out paces TiVo is because TiVo can’t stream shows between units and it can’t combine the tuners from all the TiVos in the house to automatically resolve recording conflicts. Of course with the TiVo you get another two tuners for every one you add, but I don’t think most people need as many tuners as they need ways to watch enjoy content, so the added $7 a month, plus CableCARD rental fees, just aren’t worth it.
Pictures and Music
Over the past few years I’ve had about four devices that would allow me to look at my photos and listen to my music collection on my HDTV, and while they’ve all been pretty good at music, pictures seem to be tricky. The TiVo isn’t bad at pictures, but it isn’t great — the worst part is the super small thumbnails and the TiVo Desktop that must run on your computer and who’s OS X version won’t serve up HD pictures. The VMC picture and music experience isn’t perfect, but it’s the best I’ve tried. All I had to do was copy my iPhoto Originals and iTunes Library folders over to corresponding folders on the VMC, and I was enjoying my content. The biggest bummer is that a lot of metadata doesn’t make it over, but if you really want a truely seamless experience, you can pick up MCE Tunes. But even without it, I find myself listening to music and browsing through my pictures more than ever and that includes with my Apple TV — but I will say that the music experience on the ATV is better, but without the rest of the cool stuff on one box it isn’t worth switching inputs.
Bonus
If I wanted to list all the things that VMC could do with add-ons and registry hacks that TiVo can’t — like play Blu-ray movies — I’d never have time to do anything else. Seriously, the sky is the limit and as hard as it might be for some to believe, Microsoft’s open architecture and development kit, really makes it easy for anyone to make VMC do whatever you want. Of course when you consider the amount of time it takes to set everything up — assuming you don’t buy a Nieveus or the like — all the bonus features you forfiet on the TiVo, you can almost be made up for with ease of setup.
DVR
For me at least, the main purpose of switching was to have a better DVR expereince, and while there are some die hard TiVo fans who will refuse to believe this, Vista Media Center offers the best DVR exerience availble today. But I don’t mean to say it is perfect, in fact there are few things that Microsoft can learn from TiVo, but there are more things TiVo can learn.
The Good
- The list of recorded shows is so much more enjoyable than TiVo, sure thumbnails aren’t super useful, but the vertical view is nice, and the grid of show thumbnails is just so cool. Combine this with the smooth transitions and you have a UI that makes you really notice how old and unresponsive the TiVo UI is.
- I really love the fact that you can watch a recorded program or live TV while you work in the menus or the guide, but for those times when you don’t want to watch anything, the stop button comes in handy. As if having the ability to watch TV while taking care of a few DVR housekeeping tasks isn’t cool enough, the fact that the UI is transparent in many cases, is just so cool it’s hard to explain.
- The scrub bar includes the time, so you can hit one button to see how much longer the show is and the current time.
- I really have to say, mini guide rocks. Why TiVo doesn’t have a mini guide, I’ll never understand, I guess it’s for the same reason as TiVo doesn’t show you what is set to record (or not) in the guide.
- The conflict resolution is really cool, it’s hard to explain exactly why it’s better than TiVo, but I just find it’s much easier to choose which shows I want to record — also, there are not many conflicts when you have four tuners.
- Default recording preferences, seriously, how can TiVo not have this? How did I get by configuring that I wanted to keep all recordings until I delete, on every single season pass for the past 5 years of my life? Being able to set defaults, combined with one touch recording (seriously, one press) makes the task of scheduling recordings so drop dead simple that maybe I won’t have to setup all my wife’s shows for her anymore — yeah I know, I’m dreaming.
- It’s nice to be able to preview each channel when you’re editing which channels will be in the guide, but you should be able to turn it off, ’cause it it can really slow it down. You should be able to direct dial a channel, finding channel 852 to remove, can be a lot of page downs.
- Movie info is really cool, too bad it isn’t easier to use with non-VOB movies.
- If watching a program live that will eventually be interrupted by a recording, there is an ! mark and a note, to let you know — nice touch.
- Repeats are very clearly marked in the guide, no need to dig through and find the original air date like TiVo.
- Ability to customize just about anything, like how long the scrub bar stays up for example.
The Bad
- Clear should delete the selected item anywhere in the UI, like in the “series” menu.
- There should be a deleted items instead of confirming to delete all the time.
- When you cancel a series in the “series” menu, it should return you to the closest series of the one you just deleted instead of taking you to the top again. It is annoying to delete series number 25, only to be returned back to number 1.
- There should be a preference that allows you to disable the fact that when navigating menus and you hit the bottom of a list, your selection becomes the current playing window — but you do get used to this.
- “Wish Lists” are called a custom “Keyword” recording and are very similar to TiVo, but not quite as powerful. Haven’t figured out how to only keyword search one channel and HD needs to be a category.
- Don’t seem to be able to change the size of the current playing window? Seems small on my TV.
- Should be able to create your own guide “categories” so my wife and I could have our favorite channels listed.
- I miss skip to tick on my TiVo, but the super fast forward is an okay replacement.
- If you exit VMC completely before stopping the playback of a recording, it doesn’t remember where you left off on the recording that is playing.
- VMC takes longer to launch Live TV from the main menu, this is something TiVo does almost instantly. VMC also takes longer to start playing back a recording, luckily almost all of the UI elements are more responsive than TiVo. MS should consider adding a DVR mode that would record all the tuners all the time and prioritize Live TV etc, to speed this up and to keep a buffer of all the channels.
- Can’t edit much about a single recording in a series, only ‘keep until.’
- Should be able to list Series recordings by date, instead of just either by series or date.
- No resolution pass through, so all video is converted to say 1920x1080p60.
- Grid guide should be able to take up the entire screen.
- Info should just show info instead of a menu, but it doesn’t take long to get used to hitting an arrow button instead to access the awesome mini guide.
- Can’t go back and view what you missed in the guide.
No list view guide. Chris told me how to access the list guide.- Should be able to control the buffer when switching tuners, unlike TiVo you sometimes — not sure why it’s not always — lose it on one tuner.
- Thumbnails should be 16×9 instead of letter boxed.
Conclusion
As fantastic as my Vista Media Center experience has been, it isn’t prefect. Other than the defective ATI tuner I received (which was replace 3 days later by Dell) I think that the setup will be overwhelming for most. Even if you don’t connect the VMC directly to your HDTV, there is still a considerable amount of setup that I wonder if less experienced computers users would be able to accomplish. That being said, if you’ve ever built your own computer, then you won’t have any problems — or if you aren’t scared to call support — for me this isn’t a problem, as I find this tinkering very enjoyable. In fact one of my biggest problems is that I can’t stop tinkering, which has led me to break my setup in a few cases. Now that I have everything setup, I plan to leave things be, create an image and enjoy.
To anyone out there dealing with a cable DVR, or find that you wish you could do more on your HDTV than TiVo allows, I wouldn’t hesitate to upgrade to Vista Media Center. The Media Center product has come a long way over the past few years, but I can honestly say it is ready for prime time and am confident it will only get better.
List of series recordings, no jokes about my wife’s favorite shows and yes they are higher priority than mine.
Scrub bar with total length, current position and time.
Shows I have recorded in the small view. The missing thumbnails are shows I transfered from my Series3. The samll window in the bottom is currently playing and in this case is playing a recording.
This mini guide can be viewed during Live TV or when watching a recorded program, and can be navigated by using the arrow keys.
Here I’m accessing the main menu while watching a recorded program.
Viewing the transparent guide while watching a previously recorded program — no it doesn’t force you to Live TV like TiVo. It is very easy to see my series recordings with the multiple red circles, if there were conflicts, there’d be an ! mark on the show.
This is the option DVD Library feature that shows my ripped DVDs and recorded movies. You can also see the show continuing to play in the small windows on the bottom left.
All my CableCARD problems are gone!
April 26th, 2008After all that grief it was a bad tuner and a bad configuration change I’d made. A few days ago I figured out that it was a bad idea to set windows display settings to “never off” and then yesterday I received a replacement ATI Digital Cable Tuner and not only did I have it setup in 15 minutes, but it works without ANY issues what so ever.
The occasional bad piece of hardware is a fact of life these days, especially when it’s a problem like I was having where the hardware would work fine for a few hours before it stopped. I mean seriously, how could ATI even test for something like this at the factory? It’s not like they could test the tuner for 24 hours on every tuner that leaves the factory.
I can’t say enough about how great everyone at Microsoft and ATI has been at reaching out to me to make sure my problem was resolved, I really, really, appreciate it. Ironically though, in the end it was a Dell XPS support person who didn’t hesitate to send me a replacement that fixed the problem — which I received in 3 days!
Now that everything is working properly, I have to say I’m really enjoying this setup. VMC has so many more capabilities than my TiVo and although it required more setup, it is well worth it. Of course only time will tell how much maintenance it requires, but for now I’m loving it!
Thanks to everyone who helped me out!
It never pays to be a rude when you’re a salesmen
April 23rd, 2008My first job out of high school — and before I though college was important — was as a salesmen at Circuit City selling car stereos (and installing them). One thing I learned is it never pays to be rude to the customers. At one time I was also a door to door sign salesmen, which only lasted about six months because it was the worst job I ever had — okay, not the worst but pretty bad. So I also know how much harder it can be to cold call people, than to stand in a store and wait for customer who are at least semi-intersted in your products.
Anyways, so a door to door salesmen just stopped by selling home alarms. He had a GE shirt on, but I’m not sure who he actually worked for. He started out with a lie — never a good first start — by commenting that his company made the keypad in my house. Little did he know I knew a thing or two about alarm systems. His next question was, “when’s the last time someone looked at your alarm?” And I answered, “I installed it myself.” He was obviously not happy with my answer so he asked, “oh, where’d you get the panel,” to which I replied, “I bought it online.” If he was smart, he would’ve stopped here, but no, he had to take one last chance at me with, “who monitors it?” By now you should know exactly where this is going, as I’m sure he wasn’t one bit surprised to hear me say “a company on the Internet.” At this point he got down right rude and said, “Let me guess, $7 a month and they leave a VM for the police?” I replied “yes” because I didn’t want to waste my time getting into with him, but I know very well that they call the police when the alarm goes off because I had to give them the number when I signed up, and the police have showed up when for a false alarm before. They also call me, send me an email and a text message. To top it off the service also works over a traditional phone line or the Internet.
I understand why the guy got rude, but seriously like that’s going to help the situation. He had the perfect opportunity to put a good face forward for his company and tell me how much better his service was then my current provider, but nope, instead he got a bad post about his company online. Do they care, nah, they’re GE and they’re huge.
One CableCARD problem down, one to go
April 22nd, 2008I sure hope Microsoft sends Ed Bott a nice Christmas card ’cause once again he’s helped out a fellow blogger on their quest to making Vista work. He left a comment in my original post, that helped me realize that configuring Vista’s Power setting to never turn off my display was a bad idea, because our favorite feature (HDCP) would break the output when it failed to handshake with a device that is off. So I set the Power settings to turn off the display after 5 minutes which makes the ATI driver stop trying to do the HDCP handshake when my Plasma is off. So now when I get up in the morning I’m staring at a black screen.
Unfortunately this isn’t my only problem. My ATI CableCARD tuner isn’t always working properly. Eventually it starts to macroblock very badly and sometimes even the entire screen turns green and freezes. I’ve found that the cure is to shut down the PC, unplug the ATI tuner for 30 seconds, plug it back in until the cable light turns green and then turn the XPS 420 back on. This buys me about one to eight hours of trouble free operation before the problem comes back. It starts out bearable, but then gets completely unwatchable, all the while the ATSC tuners continue to work perfectly.
After finding this helpful Microsoft page, I called Verizon and asked them to send my tuner an “init” and after a few minutes on the phone the helpful rep confirmed that my CableCARD tuner was communicating properly with their network and was everything was good to go as far as they were concerned. This ‘init’ made my tuner work perfectly again too, but by the time I got home the issue was back. Later that evening I was chatting with a friend who reminded me that when you buy an XPS system the support staff is in the US. So I gave them a call and although I don’t feel like they did a very thorough job of troubleshooting, they offered to send me a replacement. Unfortunately they said I had to call another department with my case number to get it, and you guessed it, that department was closed.
Although I don’t have much faith that a replacement tuner is the answer, I don’t have a better idea, so we’ll see how that goes, I just hope it doesn’t take another three weeks to receive it.
**Update** I received the replacement and it works perfect!
My CableCARD tuner is causing me lots of grief
April 21st, 2008It started off bad because it took me a few hours before I could even get the tuner added to my setup, but after I got it working, I thought I everything was cool and wrote up a nice little post about it. At the time everything did seem cool except the occasion drop out, which I assumed I could fix by checking my coax connections etc. But since then, not only has the occasion drop out not gone away despite spending a few hours messing with my connections — the same exact connections that work perfectly with a Series3 TiVo — but every single morning since I woken up to a system that is not operational. Then even after I remotely kill the process, I still have to reboot the system and the ATI CableCARD tuner to make the signal watchable.
First some background, skip this paragraph if you want to go straight to the problem. I’ve had a Series3 Tivo since the day they were announced and have had it working with two different providers using both SA and Moto CableCARDs. I’ve had a total of 10 CableCARD tuners installed without ANY issues and the wiring in my house is brand new. Speaking of the coax, it’s all high grade RG6, with good splitters (there are only two) and I use compression fittings.
When I removed one of my Series3 TiVos to replace it with the ATI CableCARD tuner, I took the exact same coax cable and CableCARD that has been serving me well without any issues for 14 months and used them for the ATI tuner. So I’m pretty confident that I don’t have a bad CableCARD or a signal problem. But just in case I tried both CableCARDs from my TiVo and double checked all my coax connections. I even hooked up an old attenuator that I used to use on my old HR10 TiVo, which only made things worse, so I don’t think the signal is too hot.
Anyways, on to the issue. I originally posted this at The Green Button, but since no one has really responded, I’ll try again here before throwing the thing out the window. Ever since I installed my CableCARD tuner every morning when I turn the TV on after being off all night, there is a just a black screen (TV indicates it’s receiving a 1080p signal). If I hit the buttons on the remote, I can hear the sounds and the extenders continue to work fine, but if I get out the mouse and keyboard I can’t see the cursor and it doesn’t seem to respond to any keyboard presses (not even ctrl+at+delete or ctrl+shift+esc). If I telnet in and kill ehshell.exe, it returns me to my desktop, then I re-launch VMC that then works properly, except all the CableCARD channels (ATSC channels are fine) have unwatchable pixelation (yes I checked every channel I watch, about 20). If I reboot and unplug the ATI CableCARD tuner for a second, then all the channels work fine — aside from the occasional drop out.
In the System log, I see this event every 2 seconds from some time after I turned off the display, until the time I killed ehshell.exe.
Log Name: System
Source: atikmdag
Date: 4/20/2008 9:06:46 AM
Event ID: 52233
Task Category: CPLIB
Level: Error
Keywords: Classic
User: N/A
Computer: VMC1
Description:
CPLIB :: General – Failed to authenticate output protection
My setup is pretty much a out of the box Dell XPS 420.
Intel Q6600 quad core.
3GB Ram
500GB SATA HDD
ATI Radeon HD3650 via HDMI @ 1080p60 (tried both Catalyst 8.3 and 8.4)
Pioneer PDP-6010FD
1 ATI CableCARD tuner
1 VBox PCI ATSC tuner
1 HDHomeRun dual ATSC tuner.
Since this is obviously completely unacceptable, if I can’t get it resolved, no matter how much I enjoy the VMC UI and extender architecture, I’ll just have to go back to using my TiVos.
**Update** The issue was resolved by setting Windows Power Setting to turn off the display after 5 minutes, even though Windows isn’t capable of turning off the display this appears to tell the ATI driver to stop trying to verify the HDCP handshake.
The quest for the perfect Reuben Sandwich
April 20th, 2008If you know pretty well, then you know I’m a walking contradiction. Case in point, I don’t like hot sandwiches, but my favorite sandwich is a Reuben.
I can still remember the first one I ever had, it wasn’t very good as far as Reuben go, but it was still good. The best Reuben in the world is from a cafe in Tallahassee FL called Bagel Bagel — no it isn’t made on a bagel. There are a few franchises of the original now, but the ones I’ve tried don’t use the same ingredients. The Bagel Bagel on Pensacola Ave in Tallahassee uses a pumpernickel rye swirl bread, great corn beef, it’s a triple stack, and impossible to eat without making a mess — very important trait of a good sandwich.
Recently I finally got the idea that I could make my favorite sandwich at home and I have to say it’s much harder than I thought it would be. I haven’t found the best ingredients yet, but the ones I’m getting from Sweetbay are decent. But the real problem is how to prepare it. Might seem silly, but there are many ways to do it. Right now, I’m uses a skillet with some butter and cooking it on medium for about 2 and half minutes. This toasts the bread pretty good, but leaves the sauerkraut a little cold. Next try I’m going to cook it slower and longer in the hopes that I’ll be able to keep the bread nice and browned but also get all the insides nice and warm. I’ve also tried the oven and the toaster over, and while both turned out all right, it’s hard to get the bread right in an oven. If anyone out there is good in the kitchen, I’d love some pointers. I’ve done some searching online — that’s how I got this far — but I really need someone with first hand experience.
How many KB a month do you use on your phone?
April 20th, 2008Was just looking at my AT&T Wireless bill and noted that I used 44,552KB last month. Not sure if that’s a lot, but it is compared to my wife who only used 11KB on her RAZR. It does seem like I use the Internet on my iPhone more than any other phone I’ve had, but I’m not sure if this is more than most. This might be high because I can’t access the WiFi at work (waiting on 802.1x support in June).